Technical Data; Handling And Transport; Installation; Mechanical Installation - Lippert PROJECT 2000 Manuel D'utilisation Et D'entretien

Technical data: Refer to the data plate put on the step.
Ambiental data:
Temperature of function
Temperature of storage
Highest altitude
Dampness of storage
Dampness of function of the environment
The product is shipped in perfect operating conditions after having undergone inspection in our shop.
Type of packing:
• when shipped individually the product is packed in a cardboard box.
• for multiple shipments the steps are packed on well protected pallets.
Transport should be done by a specialized firm.
Upon arrival, inform the transporter of any damage and check that the product is complete and in a perfect state.
Ascertaining that the apparatus doesn't present sign of damage and that the supply is complete and note the eventual anomalies
on the transport document or invoice.
If the damage is evident, preserve the packing so that the company of transport could inspect it immediately for an application of
reimbursement damages. If the supply isn't conforming to the order, address the supplier immediately.
Any materials inserted as protection for the packages should be disposed of according to their quality.
Packing elements can cut, wound or become hazardous if not handled with care or if used improperly. Do not leave them within
reach of children or irresponsible persons.
The machine hasn't been projected, built and tested for the operation in environments where the vehicles cannot run, with tall
degree of pollution from some substances gaseous chemistries like chlorine, ammonia and similar, in places with danger of fire and
of explosion and in places to high electric risk.
In any case, transport must be effected only by qualified, authorized personnel.
All installation procedures must be carried out by qualified, authorized personnel.
Remove the product from the packing.

5.1 MECHANICAL INSTALLATION:

lock the step in place, using the bracketing holes present on it.
Be sure to select the fastening points at the structural parts of the vehicle for which the manufacturer of same guarantees
mechanical resistance to the maximum loads for which the step is designed, in addition to its own weight.
For the double steps or those with a complete disappearance the installation stage shall include adding a side casing to the
vehicle to provide an opening of appropriate size in which to house the step.
Place the command switch for the step in a suitable position, to avoid switching it on accidentally.
Each step model has been designed and constructed in such a way as to reduce to a minimum or eliminate any risk of cutting or
catching. However, the technician who installs it will be responsible for carrying out assembly in such a way as to avoid the presence,
upon completion of installation, of any points of risk such as sharp corners, etc.
Upon completion of assembly, check that the step presents no play or movement,
Rev: 02.21.22

3.0 TECHNICAL DATA

Feature

4.0 HANDLING AND TRANSPORT

Any damage or discrepancy must be promptly notified.

5.0 INSTALLATION

indication of incorrect installation.
Value
-10 ÷ 40
-10 ÷ 50
3000
80 @ 20°C
90
Page 6
Unity
°C
°C
m s.l.m.
R.H. %
R.H. %
CCD-0004515