Fein CCG18-115 BL Mode D'emploi page 22

en
22
Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
(**)
Explanation
General prohibition sign. This action is prohibited.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Other-
wise there may be danger of injury caused by unintentional starting of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against continuous
intense sunlight.
A surface that can be touched may be very hot and thus hazardous.
Gripping surface
Switching on
Switching off
Additional information.
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This symbol confirms the certification of this product for the USA and Canada.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Battery type
Product with double or reinforced insulation
Low speed
High speed
may contain numbers and letters