Tripods; Other Accessories - Agatec GAT 220 Mode D'emploi

• Specifications
Range*
Accuracy*
Battery life
Environmental
Size
* Varies with laser used. Actual accuracy depends on beam diameter
and distance to the laser.

7.2 Tripods

The laser can be mounted on a 5/8-11 flat head tripod. You can
also use a tripod with an elevating column to adjust the height of
the laser.

7.3 Other accessories

• Laser-enhancing glasses improve the visibility of the laser beam
in bright light conditions.
• Red magnetic target improves the visibility of the laser beam in
bright conditions. Quickly attaches to any metallic surface.
• RCR500 detector/remote control functions as a detector, similar
to the SR200, plus can be used to calibrate the laser.
Cannot be used as a remote control with the GAT220,
except for calibration.
• TL25 remote control: facilitates calibration; cannot be used as a
remote, except for calibration.
16
500 ft. (150 m)
Fine: ± <1/16" (1 mm)
Standard: ± 1/8" (2.5 mm)
50 hours; 9V alkaline
Waterproof (IP66+)
6" x 3.25" x 1.5"; .35 lbs.
(15 x 8 x 3.5 cm .2 kg)
Niveau
Electronique