Tripods; Other Accessories; Warranty - Agatec A510S Mode D'emploi

You cannot move the scan, plumb point, or slope in wall mount
mode. Exit this mode to use keys 4 & 5 for these functions.
The remote control can also be used for calibrating.
To open the battery compartment and change the battery, push
the battery cover in the direction of the arrow.

6.3 Tripods

The laser can be mounted on a 5/8-11 flat head tripod. You
can also use a tripod with an elevating column to adjust the
height of the laser.

6.4 Other accessories

1. Laser-enhancing glasses improve the visibility of the laser
beam in bright light conditions.
2. Red magnetic target improves the visibility of the laser beam
in bright conditions. Quickly attaches to any metallic surface.
7. Limited Warranty
EXPRESS WARRANTY FOR HARDWARE
The manufacturer warrants to the original end user ("Customer")
that this Product will be free from defects in workmanship and
materials, under normal use, for one (1) year, unless such war-
ranty period has been extended by the manufacturer, and pro-
vided any and all operating and maintenance instructions are
strictly respected, in particular in case of extreme and/or contin-
uous applications/use of the Product. The warranty period
begins on the proved purchase date, or if applicable, date of
delivery or date of acceptance report. The manufacturer's sole
obligation under this express warranty shall be, at the manufac-
turer' sole option and expense, to replace or repair the Product
or part, or refund the purchase price paid for the Product. The
manufacturer warrants any repaired or replaced Product or part
26
for a period of ninety (90) days from shipment, or through the
end of the original warranty, whichever is longer. All Products
or parts that are replaced become the property of the manufac-
turer. This express warranty does neither cover consumables,
such as batteries, bulbs and fuses, nor third party products.
OBTAINING WARRANTY SERVICE
Customer must contact an authorized service center of the man-
ufacturer within the applicable warranty period to obtain war-
ranty service authorization. Dated proof of original purchase
from the manufacturer's authorized distributor and a description
of the defect will be required. The manufacturer is not responsi-
ble for Products or parts received without a warranty service
authorization. Repaired or replacement Products will be shipped
to Customer at the manufacturer's expense. The repaired prod-
uct or part will be shipped as soon as reasonably possible. The
manufacturer shall not be responsible for any damages occur-
ring during such shipment. For Products forming part of a fixed
installation, such place of performance shall be the site of such
installation and the manufacturer shall have the right to charge
for additional costs for such services under warranty if the site
of the Product is other than where the Product was originally
shipped or installed.
WARRANTY EXCLUSIVE
Customer's sole remedy for breach of the warranty shall be the
express warranty. The foregoing warranty is exclusive and is in
lieu of all other warranties, terms, or conditions, express or
implied, either in fact or by operation of law, statutory or other-
wise, including warranties, terms or conditions of merchantabili-
ty, fitness for a particular purpose, satisfactory quality and non-
infringement, all of which are expressly disclaimed. The manu-
facturer shall not be liable if the alleged defect or malfunction
was caused by Customer's or any other person's misuse, neg-
lect, improper installation, unauthorized attempts to open,
repair or modify the Product, inadequate maintenance, disre-
gard of operating instructions, excessive load or stress, normal
wear and tear, or any other cause beyond the range of its
intended use, by accident, fire, or other hazards, or other cause
not due or attributable to The manufacturer. This warranty does
not cover physical damage to the Product or malfunctions result-
27