Handling The Remote Control - LG TPNC488TLA1 Manuel D'utilisation

Operating Instructions
Name and Function-Remote Control
1. Signal Transmitter
• Transmits the signals to the floor standing type air conditioner
2. Operation Display of the Remote Control
3. Indoor Fan Operation Button
4. Cooling ON Button
5. Timer Set Button
• Each time the button is pressed, the mode is changed in the following process.
Time set (1, 2, 3, 4, 5, 6, 7 hours)
If you select "0" the off Timer function will be cancelled.
6. Indoor Fan Speed Selection Button
To select the desired fan speed in three steps [Low, Mid, Hi]
7. Heating Button (
Z, H/P
Auto Operation Mode Button (C/O Model)
8. Soft Dry Operation Button
9. Auto Airflow Direction Control Button
• The vertical louvers swing left and right.
10. Power ON/OFF Button
• Operation will start when this button is pressed, and stop when the button is pressed again.
11. Temperature Setting Buttons
12. Electric Heater On/Off Button (Z Model)
13. Air Cleaner Operation Button(A/CL Model)
How to insert batteries
1. Remove the cover from the back of the
remote controller.
• Slide the cover according to the arrow
direction.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Slide the cover into back position.
12 Floor Standing-Type Air Conditioner
Model)

Handling the remote control

• Aim at the signal receptor on the floor standing type air
conditioner when operating.
• The remote control signal can be received at a distance of up to
about 7meters.
• Be sure that there are no obstructions between the remote
control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct
sunlight, or next to a heating unit, or other heat source.
• Do not use rechargeable batteries
such batteries as different from
standard dry cells in shape,
dimensions, and performance.
• Change the batteries with a new
one if the remote control does not
work properly after using for an
extended length of time.