Energy Saving Cooling Mode; Display Screen Brightness; Operating The Air Conditioner Without The Remote Control - LG LS181HSV3 Manuel Du Propriétaire

ADVANCED FUNCTIONS
16

Energy saving cooling mode

This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable en-
vironment.
|
1
Press to turn the power on.
f
2
Press repeatedly to select the cooling
operation.
P
3
Press .
G
- is displayed on the display screen.
!
NOTE
This function may not be supported,
depending on the model.
!
NOTE
• Possible, Different temperature is dis-
played on between remote controller
and air conditioner during operation.

Display screen brightness

You can adjust the brightness of the indoor
unit display screen.
G
1
Press
to turn on/off the display screen.
!
NOTE
This function may not be supported,
depending on the model.
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according to
type of model.
2
Press the On/Off button.
* The feature can be changed according to
type of model.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
Room temp. Set temp.
Below 21°C
24°C (75.2°F)
(69.8°F)
Above 21°C
(69.8°F) and
23°C (73.4°F)
below 24°C
(75.2°F)
Above 24°C
22°C (71.6°F)
(75.2°F)
- For cooling-only models, the temperature
is set to 22°C (71.6°F).
ON/OFF
button
Operation
mode
Heating
operation
Dehumidify-
ing operation
Cooling
operation