Troubleshooting - Yamaha 2B Manuel D'utilisation

EMN10011¯
Trouble
A. Starter will not
operate
B. Engine will not
start
(Starter operates)

TROUBLESHOOTING

Possible Cause
1. Battery capacity weak or low
2. Battery connections loose or corroded
3. Fuse for electric start circuit blown
4. Starter components faulty
5. Shift lever is gear-in position
1. Fuel tank empty
2. Fuel contaminated or stale
3. Fuel filter clogged
4. Starting procedure is wrong
5. Fuel pump malfunctions
6. Spark plug(s) fouled or wrong type
7. Spark plug cap(s) fitted incorrectly
8. Poor connections or damaged
ignition wiring
9. Ignition parts faulty
10. Engine stop switch lanyard not
attached
11. Engine inner parts damaged
1. Check battery condition. Use
battery of recommended capacity.
2. Tighten battery cables and clean
battery terminals.
3. Check for cause of electric
overload and repair.
Replace fuse with one of correct
amperage.
4. Have Yamaha dealer service.
5. Position to neutral.
1. Fill tank with clean, fresh fuel.
2. Fill tank with clean, fresh fuel.
3. Clean or replace it.
4. Read "STARTING ENGINE"
section.
5. Have Yamaha dealer service.
6. Inspect spark plug(s). Clean or
replace with recommended type.
7. Check and re-fit cap(s).
8. Check wires for wear or breaks.
Tighten all loose connections.
Replace worn or broken wires.
9. Have Yamaha dealer service.
10. Attach lanyard.
11. Have Yamaha dealer service.
5-1
GB
Remedy