Transporting And Storing Outboard Motor; Trailering Outboard Motor; Storing Outboard Motor - Yamaha 2B Manuel D'utilisation

GB
EMU01369*
TRANSPORTING AND

STORING OUTBOARD MOTOR

w
Leaking fuel is a fire hazard. When trans-
porting and storing the outboard motor,
close the air vent screw and fuel cock to
prevent fuel from leaking.

TRAILERING OUTBOARD MOTOR

The motor should be trailered and stored
in the normal running position. If there is
insufficient road clearance in this position,
then trailer the motor in the tilt position
using a motor support device such as a
transom saver bar.
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
4-4