Function Description - Oase Waterfall Illumination Notice D'emploi

- EN -
Translation of the original Operating Instructions
Information about these operating instructions
Welcome to OASE Living Water. You made a good choice with the purchase of this product Waterfall Illumination.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
GB
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Important information for trouble-free operation.
 A Reference to a figure, e.g. Fig. A.
→ Reference to another section.
Product Description
Delivery scope and unit configuration
 A Waterfall Illumination
1 Light rail
2 Holder, right, left
3 Power cord
4 Transformer

Function description

Waterfall Illumination allows the illumination of a suitably dimensioned artificial waterfall at its source with a warm
white light.
Intended use
Waterfall Illumination, referred to in the following as "unit", may only be used as specified in the following:
• Only operate with water at a water temperature of +4 °C to +35 °C.
• Operation under observance of the technical data.
- EN -
Quantity
1 x
2 x
1 x
1 x
7