Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
32
AutoView 2020/2030 Installer/User Guide
2.
Click Commands. The Commands dialog box displays.
Figure 3.15: Commands Dialog Box
3.
Select Scan Enable in the Commands dialog box.
4.
Click X to close the Commands dialog box.
NOTE: Scanning will begin when the Main dialog box or flag is displayed. Scanning is inhibited in any other
OSCAR interface dialog box.
To cancel Scan mode:
1.
Select a server if the OSCAR interface is open.
-or-
Move the mouse or press any key on the keyboard if the OSCAR interface is not open.
Scanning will stop at the currently selected server.
-or-
Press
Print Screen
2.
Click Commands. The Commands dialog box displays.
3.
Clear Scan Enable.
Viewing the display configuration
The Display Configuration dialog box allows you to view the current configuration of your
AutoView 2020/2030 switching system.
To view the current configuration:
1.
If the OSCAR interface is not open, press
2.
Click Commands- Display Config. The Display Configuration dialog box displays and lists
your system configuration values.
NOTE: This dialog box is for viewing the current configuration only.
. The Main dialog box will appear.
The Main dialog box will appear.
Print Screen.
Publicité
Chapitres
Table des Matières
