Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To set the Network Speed, Network Configuration (Internet Protocol version) or IP
Address:
1.
Press
Print Screen
2.
Click Setup-Network. The Network dialog box displays.
3.
Select the appropriate settings from the dialog box.
4.
Click OK.
Setting console security
The OSCAR interface enables you to set security on your analog port console. You can establish a
screen saver mode that engages after your console remains unused for a specified Inactivity Time.
Once engaged, your console will remain locked until you press any key or move the mouse. You
will then need to type in your password to continue.
Use the Security dialog box to lock your console with password protection, set or change your
password and enable the screen saver.
NOTE: If a password has been previously set, you will have to enter the password before you can access the
Security dialog box.
To access the Security dialog box:
1.
Press
Print Screen
2.
Click Setup - Security. The Security dialog box displays.
To set or change the password:
1.
Single-click and press
2.
Type the new password in the New text box and press
Passwords must contain both alpha and numeric characters, are case sensitive and may be up to
12 characters long. Supported characters are: A to Z, a to z, 0 to 9, space and hyphen.
3.
In the Repeat box, type the password again and press
4.
Click OK to change only your password, and then close the dialog box.
NOTE: If you should lose or forget your password, please contact Avocent Technical Support. See Appendix C
for contact information.
To password protect your console:
1.
Set your password as described in the previous procedure.
2.
Select Enable Screen Saver.
3.
Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of password
protection and the screen saver feature.
4.
For Mode, select Energy if your monitor is E
to launch the OSCAR interface. The Main dialog box will appear.
to launch the OSCAR interface. The Main dialog box will appear.
or double-click in the New text box.
Enter
.
Enter
.
Enter
®
S
compliant; otherwise select Screen.
NERGY
TAR
Chapter 3: Operations
27
Publicité
Chapitres
Table des Matières
