Upgrading Your Firmware; Scanning Your System; Figure 3.13: Upgrade Dialog Box - Avocent AUTOVIEW 2020 Guide D'installation Et D'utilisation

30 AutoView 2020/2030 Installer/User Guide

Upgrading Your Firmware

The OSCAR interface also allows you to upgrade the firmware available for the AutoView
2020/2030 switch. For optimum performance, keep your firmware current.
NOTE: IAC modules are not field upgradable.

Figure 3.13: Upgrade Dialog Box

To upgrade firmware:
1. Press
Print Screen
2. Click Commands-Display Versions-Upgrade. The Upgrade dialog box displays.
3. Click Upgrade. A Warning dialog box displays. Clicking OK will open the Upgrade Process
dialog box. The progress of the upgrade will be indicated in the Programmed field.

Scanning Your System

In Scan mode, the AutoView 2020/2030 switch will automatically scan from port to port (server to
server). A user can scan up to 100 servers, specifying which servers to scan and the number of
seconds that each server will display. The scanning order is determined by placement of the server
in the list. The list is always shown in scanning order. You can, however, choose to display the
server's name or EID number by pressing the appropriate button.
To add servers to the scan list:
1. If the OSCAR interface is not open, press
to launch the OSCAR interface. The Main dialog box will appear.
. The Main dialog box will appear.
Print Screen