Figure 3.14: Scan Dialog Box - Avocent AUTOVIEW 2020 Guide D'installation Et D'utilisation

2. Click Setup - Scan. The Scan dialog box displays.

Figure 3.14: Scan Dialog Box

3. The dialog box contains a listing of all servers attached to your switch. Click the checkbox next to
the servers you wish to scan.
-or-
Double-click on a server's name or port.
-or-
Press Alt and the hotkey for Add/Remove on the highlighted server you wish to add to the list.
You can select up to 100 servers from the entire list.
4. In the Time box, type the number of seconds (from 3 to 255) of desired time before the scan
moves to the next server in the sequence.
5. Click OK.
To remove a server from the scan list:
1. In the Scan dialog box, deselect the checkbox next to the server to be removed.
-or-
Double-click on the server's name or port.
-or-
Click the Clear button to remove all servers from the scan list.
-or-
Press Alt and the hotkey for Add/Remove on the highlighted server you wish to remove from
the list.
2. Click OK.
To start the Scan mode:
1. If the OSCAR interface is not open, press The Main dialog box will appear.
Print Screen.
Chapter 3: Operations 31