Integrating The Usb Ccid Smart Card Reader; Figure 3.3: Vreader Dialog Box (Administator) - Avocent AUTOVIEW 2020 Guide D'installation Et D'utilisation

18 AutoView 2020/2030 Installer/User Guide
NOTE: To open a virtual media session with a server, the server must first be connected to the switch using a
virtual media-capable DSAVIQ (USB2 or USB2L) or AVRIQ-VMC module.

Integrating the USB CCID smart card reader

NOTE: The term "smart card reader" is also referred to as VReader throughout this manual.
The Autoview 2020/2030 switch features compatibility with USB CCID-compliant smart card
readers. Plug your smart card into an available USB port and follow the instructions below to
enable your smart card.
To connect your smart card:
1. Press
Print Screen
2. Use the
Arrow
then press
3. Press
Print Screen
4. Click VReader. The VReader dialog box displays.

Figure 3.3: VReader Dialog Box (Administator)

5. Click to enable or disable the desired access options:
• Smart Card Reader - Selects the detected smart card reader for VReader connections.
• Auto Connect - Sets the global setting for all VReader modules to auto connect for
VReader connections.
• Auto Disconnect - Sets the global setting for all VReader modules to auto disconnect for
VReader connections.
6. Click OK to accept the options you have selected and return to the Main dialog box.
NOTE: The Autoview 2020/2030 switch detects smart card insertion and removal events and notifies the
connected target when one of these events occurs. To open a virtual reader session with a server, the server
must first be connected to the switch using an AVRIQ-VMC module.
to launch the OSCAR interface. The Main dialog box displays.
keys to highlight the server name which you wish to utilize your smart card,
.
Enter
to re-open the Main dialog box.