Selecting Display Language; Controlling The Status Flag; Figure 3.9: Language Dialog Box; Table 3.4: Oscar Interface Status Flags - Avocent AUTOVIEW 2020 Guide D'installation Et D'utilisation

24 AutoView 2020/2030 Installer/User Guide
To set a Screen Delay Time for the OSCAR interface:
1. Type in the number of seconds (0 to 9) to delay the OSCAR interface display after you press
. Entering
Screen
2. Click OK.
Setting a Screen Delay Time allows you to complete a soft switch without the OSCAR interface
displaying. To perform a soft switch, see Soft switching in this chapter.

Selecting display language

Use the Setup dialog box to change the display language for the OSCAR interface.

Figure 3.9: Language Dialog Box

To select a language for the OSCAR interface:
1. Press Print Screen
2. Click Setup - Language. The Language dialog box diplays.
3. In the Language dialog box, select the desired language and click OK.

Controlling the status flag

The status flag displays on your desktop and shows the name or EID number of the selected server
or the status of the selected port. Use the Flag dialog box to configure the flag to display by server
name or EID number, or to change the flag color, opacity, display time and location on the desktop.

Table 3.4: OSCAR Interface Status Flags

Flag
will instantly launch the OSCAR interface with no delay.
0
to launch the OSCAR interface. The Main dialog box displays.
Description
Flag type by name
Flag type by EID number
Print