Enabling virtual media or a smart card reader per port
Both virtual media and your smart card reader can be enabled and disabled on a per port basis.
To enable or disable either virtual media or a smart card reader:
1.
Press
Print Screen
2.
Click Setup to open the Setup screen.
3.
Click VMedia
4.
Click the appropriate checkbox(es) to indicate virtual media or virtual reader capability.
•
Clear All - Click to deselect all checkboxes.
•
Check All - Click to select all checkboxes.
•
OK - Click to accept changes.
Configuring OSCAR Interface Menus
You can configure your AutoView 2020/2030 switch from the Setup dialog box within the OSCAR
interface. Select the Names button when initially setting up your switch to identify servers by
unique names. Select the other setup features to manage routine tasks for your servers from the
OSCAR interface menu.
Table 3.3: Setup Features to Manage Routine Tasks for Your Servers
Feature
Menu
Security
Flag
Language
Devices
Names
Keyboard
Broadcast
Scan
Switch
to launch the OSCAR interface. The Main dialog box displays.
VReader
open the desired setup screen.
or
to
Purpose
Change the server listing between numerically by port or EID number and
alphabetically by name. Change the Screen Delay Time before the OSCAR interface
displays after pressing Print Screen.
Set passwords to restrict server access. Enable the screen saver.
Change display, timing, color or location of the status flag.
Choose the language display.
Identify the appropriate number of ports on an attached cascaded switch.
Identify servers by unique names.
Choose your keyboard country code.
Set up to simultaneously control multiple servers through keyboard and
mouse actions.
Set up a custom scan pattern for up to 16 servers.
Set up the switch Switch mode.
Chapter 3: Operations
19