General Information; Maintenance And Repair; Damage In Transit; Warranty - Ecolab LMI 02 Notice Technique

Appareil de mesure et de commande de conductivité
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1

General information

This manual contains all important information on the function, operation, configuration of
the LMI 02 (from Software status 1.04) as well as the troubleshooting and servicing.
The LMI 02 is a conductivity measuring and control instrument with inductive
measurement.
1.1

Maintenance and Repair

Repair and maintenance work must be carried out with the help of a separate manual by
authorised qualified personnel only.
Suitable safety clothing and safety glasses must be worn for the maintenance and repair
CAUTION
work
1.2

Damage in transit

Do not install the instrument if, after unpacking it, you discover that it has been damaged in
transit.
1.3

Warranty

The manufacturer undertakes warranty for the operating safety and performance of the
metering unit under the following conditions only.
Assembly, connection, installation, maintenance and repair must be carried out by
authorised personnel only
- The metering unit must be used in accordance with the instructions of the technical
manual
- Only use original parts for repair work.
- Only use the approved products.
In addition, the general warranty and service conditions of the company ECOLAB-
Engineering GmbH are applicable.
1.4

Contact address / manufacturer

ECOLAB-Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax
eMail:
engineering-mailbox@ecolab.com
417102012_LMI02.doc
(+49) 86 62 / 61 2 35
- 54 -
Rev. 10-01.09

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

187601187602187603

Table des Matières