Settings And Startup; Operating Level; Key Functions - Ecolab LMI 02 Notice Technique

7

Settings and Startup

7.1

Operating level

At the operating level, you can:
•
Start and stop pre-metering with the arrow keys (in AS mode)
•
Display the uncompensated conductivity value for control purposes.
•
Switch off the instrument.
From the operating level, you can enter the code to switch the instrument into the
service, parameter and configuration levels.
7.1.1

Key functions

fig 7.1
Operating level
Activation of menu:
Access code
Display uncompensated conductivity
value with pressed key (with a *
before the conductivity value)
Selection of digit of access code
Increase value of access code
Start pre-metering (press key 5s)
Decrease value of access code
Stop pre-metering (press key 5s)
Switch to the next display in the
information level.
Switch off instrument
Press any key to restart the
instrument.
Switch to information level.
(Display of limit values SP1 and
SP2, output current and Tkα as well
as pre-metering and max. metering
time)
417102012_LMI02.doc
Key(s)
NEXT
↵ (SEL)
and ↵ (press
and
simultaneously for 5
seconds
and
(press together briefly)
- 68 -
Service, parameter and
configuration levels
Call up a menu. Return to starting
level
Call up menu, scroll in the menu,
move the cursor
Increase the value in a menu
Decrease the value in a menu
Rev. 10-01.09