Ego Power+ ST1500F Guide D'utilisation page 19

Masquer les pouces Voir aussi pour ST1500F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STARTING/STOPPING THE STRING TRIMMER
Before starting the string trimmer
◾ ◾
Make sure that you have a secure and balanced footing.
◾ ◾
Stand upright and hold the string trimmer in a relaxed position.
◾ ◾
Make sure that the cutting line is not touching the ground or any other objects.
◾ ◾
Hold the string trimmer with both hands: one hand on the rear handle and one
hand on the front-assist handle.
To start the string trimmer
(Fig. 11)
1. Press the lock-off lever down and
hold it in that position. Depress the
trigger to turn on the string trimmer.
2. The rotational speed of the cutting
line is controlled with the variable
speed trigger. More pressure on
the trigger results in higher cutting
speed; less pressure on the trigger results in lower cutting speed. Adjust the
speed to suit the task at hand.
NOTICE: The motor runs only when the lock-off lever and trigger are both pressed .
To stop the string trimmer
Release the lock-off lever and the trigger to stop the string trimmer.
WARNING:
breaks and after finishing work.
Always remove the battery pack from the string trimmer during work
56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER
11
Lock-off Lever
Trigger
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

St1500sf

Table des Matières