Ego Power+ ST1500F Guide D'utilisation page 28

6. Remove the flange from the spool
base and save it to secure the new
spool base (Fig. 27).
Install the new trimmer head
1. Position the flange removed in step
6 of the "remove the trimmer head"
section onto the motor shaft with
the flat surface facing away from
the base (Fig. 28).
2. Align the mounting hole in the
spool base with the motor shaft and
mount the base onto the shaft.
3. Position the plain washer and then
the spring washer onto the motor shaft (Fig. 29).
29
28
56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER
27
28
Plain Washer
Plain Washer
Spool Base
Flange
Flat surface facing
away from the base
Spring Washer