Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Press
to exit the setting menu.
8
Note:
For KD-T721BT/KD-TD72BT/KD-SR87BT, you need to set [SPK/PRE OUT] to
[REAR/SUB.W] or [SUB.W/SUB.W] before you can make the subwoofer level
settings.
Illumination Color Setting
For KD-T92MBS, you can set your preferred illumination color for each zone.
Press and hold
to enter menu settings.
1
Turn the volume knob clockwise to select [COLOR], then press the knob.
2
Press the volume knob if [PRESET] is shown on the display.
3
Turn the volume knob to choose a zone ([ALL ZONE], [ZONE 1], [ZONE 2]),
4
then press the knob.
8
Turn the volume knob to choose a color, then press the knob.
5
• [COLOR 01] to [COLOR 49]
• [USER]: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• [COLOR FLOW01] to [COLOR FLOW03]: Color changes at
different speeds.
• [CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/
[RELAX]/[SUNSET]: The selected color pattern is
shown. (Selectable only when [ALL ZONE] is selected
in step 4.)
Repeat step 4 and step 5 to set color for other zones.
6
Press
to exit.
7
Other Information
For playback operations of AUX and SiriusXM® Radio sources, refer to the
INSTRUCTION MANUAL on the following website:
<https://www.jvc.net/cs/car/>
• The availability of each source vary depending on the model.
Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery
Publicité
Table des Matières
