Parts List - Nuna pipa icon Mode D'emploi

1 According to the ECE R129/00 Regulation, the infant child
restraint with Base is a Universal ISOFIX Class C, D infant child
restraint and should be fitted using the ISOFIX connections.
2 This is an "i-Size" child restraint System. It is approved to
Regulation ECE R129/00, for use in, "i-Size compatible" vehicle
seating positions as indicated by vehicle manufacturers in the
vehicle users' manual.
3 If in doubt, please consult the infant child restraint manufacturer
or the retailer.
This is an i-Size ISOFIX infant child restraint SYSTEM.It is
approved to ECE R129/00 series of amendments for not all vehicle
manufacture's handbooks list i-Size compatibility yet. This seat and
base is also approved for use in ISOFIX compatible vehicles. Please
refer to the vehicle manufacturer's website or consult your dealer.
It will fit vehicles with positions approved as i-Size ISOFIX positions
(as detailed in the vehicle handbook), depending on the category of
the infant child restraint and of the fixture. If in doubt, consult either
the infant child restraint manufacturer or vehicle manufacturer.
13

Parts List

Some module may vary depending on model
1 Head Support
2 Seat Pad
3 Side Guides
4 Infant Insert
5 Adjustment Webbing
6 Adjustment Button
7 Safety Buckle
8 Shoulder Harness Straps
9 Canopy Mount
10 Canopy
11 Handle
12 Handle Button
13 Rear Guide
1
2
3
4
9
5
8
7
6
15
16
14 Stroller Release Handle
15 ISOFIX Connector
16 Shell Indicator
17 ISOFIX Guides
18 Load Leg
19 Load Leg Adjust Button A
20 Load Leg Indicator
21 Load Leg Adjust Button B
22 Infant Child Restraint
Release Button
23 Lock-off
10
11
12 14
13
23
22
21
17
18
20
19
14