Adjusting The Display Brightness - Motorola WAVE TLK 100i Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Voice announcement sounds All Alert Tones Off.
The display shows an "X" mark beside the Alert Tones icon.
All tones and alerts are turned off.
12.4

Adjusting the Display Brightness

Procedure:
1 Press the Menu/Programmable button.
2 Locate the Display Brightness icon.
3 To select the brightness level, toggle the Volume buttons.
The lowest brightness level is 1 and the highest is 4.
Voice Announcement sounds the selected brightness level.
The screen shows the selected display brightness.
12.5
Turning Location On or Off
NOTE:
Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with
the following procedure.
Location can only be accessed when enabled. Check with your dealer or system administrator
for more information.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Location icon.
3 To turn on Location, press the Volume Up button. To turn off, press the Volume Down button.
If Location is on, the following occurs:
Voice Announcement sounds Location Service On.
The display shows a check mark beside the Location icon.
If Location is off, the following occurs:
Voice Announcement sounds Location Service Off.
The display shows an "X" mark beside the Location icon.
MN007302A01-AC
Chapter 12 : Menu
33

Publicité

Chapitres

Table des Matières
loading

Table des Matières