Getting Started; Turning Radio On/Off; Adjusting Volume; Reading The Display - Motorola RDX Série Guide D'utilisation

GETTING STARTED

For the following explanations, refer to "Parts Of The
Radio" on page 12.

TURNING RADIO ON/OFF

To turn ON the radio, rotate the On/Off/Volume Knob
clockwise. The radio plays one of the following:
• Power up tone and channel number
announcement, or
• Battery level and channel number
announcements, or
• Silent (Audible tones disabled)
The LED blinks red briefly.
To turn the radio OFF, rotate the On/Off/Volume Knob
counterclockwise until you hear a 'click' and the radio
LED Indicator turns OFF.

ADJUSTING VOLUME

Turn the On/Off/Volume Knob clockwise to increase
the volume, or counterclockwise to decrease the
volume.
Note: Do not hold the radio too close to the ear
when the volume is high or when adjusting
the volume
28
English

READING THE DISPLAY

Keypad Lock
Scan
Scramble
Vox / iVox
Battery
Level
Channel
Indicator
Programming
Frequency
Mode
Indicator
Indicator
Note: The radio display shown here is for icon
location only. Each radio display may
appear different (channel and code) based
on the pre-programmed radio defaults and
features available in the model or region.
Pressing any button, except the PTT button,
will turn on the backlight.

SELECTING A CHANNEL

To select a channel, turn the Channel Selector Knob
until you reach the desired channel. An audible voice
indicates the selected channel.
Each channel has its own Frequency, Interference
Eliminator Code and Scan Settings.
Hi Power
Signal
Strength
Channel
Number
Interference
Eliminator Code
Indicator