Warranty Claim Procedure - SilverCrest SDL 300 C2 Mode D'emploi

Scope of the warranty
This appliance has been manufactured in
accordance with strict quality guidelines and
inspected meticulously prior to delivery .
The warranty covers material faults or production
faults . The warranty does not extend to product
parts subject to normal wear and tear or to fragile
parts which could be considered as consumable
parts such as switches, batteries or parts made of
glass .
The warranty does not apply if the product has
been damaged, improperly used or improperly
maintained . The directions in the operating
instructions for the product regarding proper use
of the product are to be strictly followed . Uses
and actions that are discouraged in the operating
instructions or which are warned against must be
avoided .
This product is intended solely for private use and
not for commercial purposes . The warranty shall
be deemed void in cases of misuse or improper
handling, use of force and modifications / repairs
which have not been carried out by one of our
authorised Service centres .

Warranty claim procedure

To ensure quick processing of your case, please
observe the following instructions:
■ Please have the till receipt and the item number
(IAN) 377134_2110 available as proof of
purchase .
■ You will find the item number on the type plate
on the product, an engraving on the product,
on the front page of the operating instructions
(below left) or on the sticker on the rear or
bottom of the product .
■ If functional or other defects occur, please
contact the service department listed either by
telephone or by e-mail .
■ You can return a defective product to us free
of charge to the service address that will be
provided to you . Ensure that you enclose the
proof of purchase (till receipt) and information
about what the defect is and when it occurred .
│ GB │ IE
■ 12 SDL 300 C2