Worx JAWSAW WG320 Mode D'emploi page 21

in order to grease all areas of the wheel.
To do this, pull the Saw Chain by hand to
rotate the chainwheel and align the parts
of the wheel that needs to be greased with
the lubrication hole. (See Fig. AA)
CLEaNiNg
Regularly open the Chain Access Cover (9)
and remove any debris that has become
trapped.
Regularly clean the ventilation slots with a
clean, dry paint brush.
To clean the tool, use only mild soap and a
damp cloth. Never let any liquid get inside the
tool and never immerse any part of the tool
into liquid.
TRaNSPoRTiNg
Always transport the tool with the Guide Bar
(7) and Saw Chain (8) inside the protection
guard.
Cordless Limbing and Trimming Chain Saw en
21 21