Product Overview; Installation Overview - STEINEL NM 5000-2-24 Consignes D'installation

2
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualified electrician is recommended

Installation Overview

In this package
• NM 5000-2-24 sensor
• Threaded nipple, washer and
nut
• Installation instructions
Applications
• Business signs
• Corridors
• Vestibules
• Office areas
• Entrances
• Garages
www.steinel.net
(800) 852-4343
WARNING
Needed for installation
• Recommended wire: 18AWG,
3 conductor
• For use with a STEINEL power
pack
• Wire nuts
• Ceiling mount with threaded
nipple: 7/8" hole saw
• Wall or ceiling mount with
screws: 2 mounting screws
• Screwdriver
Intended uses
• Suitable for automatic
switching of lights based on
ambient brightness
Environmental considerations
• For indoor use only

Product Overview

Ceiling
24
or wall
VDC
mount
IP20
Product description
The NM 5000-2-24 light level
controller measures ambient
light levels to switch lighting on
and off automatically.
Specifications
Voltage 24 VDC, 15 mA
Light level .05 - 100 footcandles
.5 - 1000 lux
Environment Rated IP20
-4°F to +122°F
-20° C to +50°C
Dimensions
3.74 x 3.74 x 2.56 in
95 x 95 x 41.5 mm
5 year warranty
UL and CUL Listed, RoHS Compliant
www.steinel.net
(800) 852-4343
3