Errors - Sharp CS-2635RH Mode D'emploi

Fig. 3
Fig. 4
DO NOT PULL PAPER BACKWARDS AS THIS
M AY C A U S E D A M A G E T O P R I N T I N G
MECHANISM.
Paper cutter
Fig. 5
10

ERRORS

There are several situations which will cause an
overflow or an error condition. When this occurs,
the error symbol "E" will be displayed and all keys
will electronically lock.
The contents of the memory at the time of the error
are retained.
If an "0•E" is displayed at the time of the error,
must be used to clear the calculator.
If an "E" with any numerals except zero is
displayed, the error may be cleared with
and the calculation can still be continued.
Error conditions:
1. Entry of more than 12 digits or 11 decimals.
This error can be cleared with
2. When the integer portion of an answer exceeds
12 digits.
3. When the integer portion of the contents of the
memory exceeds 12 digits.
(Ex. 999999999999
4. When any number is divided by zero.
(Ex. 5 0 )
or
or .
1 )