Errors - Sharp EL-2607PC Mode D'emploi

ERRORS

There are several situations which will cause an
overflow or an error condition. When this occurs,
"E" will be displayed. The contents of the memory
at the time of the error are retained.
If an "0•E" is displayed at the time of the error,
must be used to clear the calculator. If an "E" with
any numerals except zero is displayed, the error
may be cleared with
can still be continued.
Also, in rare cases, printing may stop midway and
the indication "E" appear on the display. This is not
a malfunction but is caused when the calculator is
exposed to strong electromagnetic noise or static
electricity from an external source. Should this
occur, press the
calculation from the beginning.
Error conditions:
1. Entry of more than 12 digits or 11 decimals.
This error can be cleared with
2. When the integer portion of an answer exceeds
12 digits.
or and the calculation
key and then repeat the
or .
3. When the integer portion of the contents of the
memory or grand total memory exceeds 12
digits.
(Ex. 999999999999
4. When any number is divided by zero.
(Ex. 5 0 )
8
1 )