Errors - Sharp EL-2901RC Mode D'emploi

Fig. 2
DO NOT PULL PAPER BACKWARDS AS THIS
MAY CAUSE DAMAGE TO PRINTING
MECHANISM.
There are several situations which will cause an
overflow or an error condition. When this occurs,
"E" will be displayed. The contents of the memory
at the time of the error are retained.
If an "0 E" is displayed at the time of the error, "– –
Fig. 3
– – – – –" will be printed in red and
used to clear the calculator.
Also, in rare cases, printing may stop midway and
the indication "E" appear on the display. This is not
a malfunction but is caused when the calculator is
exposed to strong electromagnetic noise or static
electricity from an external source. Should this
occur, press the
calculation from the beginning.
Error conditions:
1. When the integer portion of an answer exceeds
12 digits.
2. When the integer portion of the contents of the
memory exceeds 12 digits.
(Ex.
3. When any number is divided by zero.
(Ex. 5
7

ERRORS

key and then repeat the
999999999999 1
0 )
must be
)