Panasonic CF-VWLS071 Mode D'emploi page 21

4
Install software keyboard
Select [Start]-[Run], input [L:\softkb\setup.exe] and select [OK].
Follow the on-screen instructions.
5
Install MeiWDS program
Select [Start]-[Run], input [L:\meiwds\setup.exe] and select [OK].
Follow the on-screen instructions.
Setup the Wireless Display
1
Slide the latch to the right, and open the cover, then in-
sert the battery pack in the wireless display. After in-
serting the battery pack, close the cover, then slide the
latch to the left. (
less display)
CAUTION
Be sure to insert the battery pack as illustrated.
2
Connect the wireless display to a power outlet and turn
on the wireless display.
NOTE
<During the setup procedure after reinstalling
only>
Press the Menu button on the wireless display, then
select [Option], and then select [Setup].
When [Do you want to change wireless setting?] is
displayed, select [Yes].
<Wireless display screen>
Select network type.
AdHoc
Operating Instructions of the wire-
Infrastructure Cancel
Latch
connector
Tab
Power Switch
E
21