Panasonic CF-VWLS071 Mode D'emploi page 28

First-time Operation
<Limitation when using the serial port of the wireless display>
When the wireless display is not connected to the computer, the serial port of the wireless
display can not be used.
There are some serial devices and applications that will not work. This is because the
serial port of the wireless display operates through a virtual serial port.
• Devices or device drivers that start up and carry out port operation confirmation be-
fore connection establishment of the wireless display
For example: Serial mouse devices
• Non-virtual port applications
For example: MS-DOS applications
• A modem
• Direct cable connection
In above cases, the computer may freeze.
<Using the software keyboard>
E
When [Always On Top] setting is released, the software keyboard does not remain on top
even if the character input box is selected (except during logon and password input).
Windows 98
When the LCD/external display is turned off by the [Turn off monitor] setting in [Control
Panel] - [Power Management]*, the screen on the wireless display may remain being dis-
played.
Windows 2000
*
Windows 2000
Communications may be affected when there is a high load on the computer.
The mouse cursor on the LCD of the computer may flicker when the computer is con-
nected with the wireless display.
Windows NT
When removing the wireless LAN card after starting Windows, the error may occur.
After finishing the network settings, reinstall the Windows NT 4.0 service pack.
Add the check mark for [Show window contents while dragging] in [Control Panel] -
[Display] - [Plus!].
28
Windows 98
16-bit applications
Windows 2000
: [Power Option]
Windows NT