Panasonic CF-VWLS071 Mode D'emploi page 32

Changing the Settings of the Wireless Display
Windows 98
2
Select [Start] - [Settings] - [Control Panel] - [Network] - [TCP/IP -> WLAN
PC Card] - [Properties] - [IP Address], set the parameters by following the
<Step 3> screen, then select [OK].
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Network and Dial-up Connections] -
[Local Area Connection] - [Properties] -[Internet Protocol (TCP/IP)] - [Proper-
ties], set the parameters by following the <Step 3> screen, then select [OK].
Windows NT
Select [Start] - [Settings] - [Control Panel] - [Network] - [Protocol] - [TCP/IP
Protocol] - [Properties] - [IP Address], set the parameters by following the
<Step 3> screen, then select [OK].
When setting the security key and/or other settings
E
Select [Control Panel] - [Wireless Network], then select [Edit], and then set the
necessary settings.
For example:When setting the security key
5
Restart the computer
32
This screen is a sample.
Add the checkmark for [Enable Data
Security], then set [Encryption key] by
following the <Step 2> screen, then
select [OK].