Important Notes; Symbols Used; Liability And Warranty - Schwamborn DSM 650-RC Manuel D'utilisation

EN
DSM 650‐RC / DSM 800‐RC

1 Important notes

39 F Locking disks
40 F Cross bar
41 F Clamping lever
42 G Manual valve
43 H T‐bolt
44 H Gearbox support
45 I Coupling bolt
46 K Velcro strip
47 N Handle
48 N Stop bolt
49 O Recess
50 O Grinding tool
51 O Tool mount
52 O Gearbox
53 P Lashing gear
54 Q Cover
55 QR Filter lid
56 Q Filter
57 R Drive battery
58 R Earth cable
1 Important notes
The machine may be used only with the accessories
supplied by the manufacturer for stripping, wet and
dry grinding of floor surfaces such as:
— cement
— screeds
— synthetic resin screeds / asphalt
— natural stone floors
— residual adhesive or filling compound
— floor remnants (e.g. foam backing)
Any other use of the machine can lead to dangerous
situations and is prohibited!
To ensure correct use of the machine, follow the in­
structions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the machine, the operat­
ing personnel must carefully read and
understand this operating manual!
Keep this operating manual close at
hand for easy reference!
Read and observe documents and operating manuals
provided by suppliers!
If the machine is on loan to other parties, the operat­
ing manual needs to be provided with the machine
and its importance must be made clear!
20

1.1 Symbols used

The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Warning
Additional information
This symbol indicates additional information.

1.2 Liability and warranty

 Schwamborn Gerätebau GmbH
All rights, including those pertaining to translation, lie
with Schwamborn Gerätebau GmbH.
No part of this documentation may be reproduced,
used or distributed in any form without the written
permission of Schwamborn Gerätebau GmbH.
Liability or warranty is excluded if:
— The instructions in the operating manual
have not been observed.
— The machine or its attachments were im­
properly operated.
— The maintenance was carried out inade­
quately or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used,
has been altered or was removed.
— The specified power supply ratings and
surrounding conditions have not been ob­
served.
— Unsuitable tools have been used.
— An unsuitable dust extraction has been
used.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer's permission. Any
such actions will void the warranty.
Prohibition Direction