Powerreclinexr ® With Massage And Heat Operating Instructions - La-Z-Boy PowerRecline XRw Instructions

Masquer les pouces Voir aussi pour PowerRecline XRw:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PowerReclineXR
Operating Instructions
– To reduce the risk of electric shock, serious
DANGER
injury or death:
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
WARNING
– To reduce the risk of serious injury:
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back
of the unit. Move the unit into or out of the reclining position slowly, making sure that
no children or pets are in close proximity.
• The PowerReclineXR
®
units are intended for a single occupant not exceeding 300 pounds
per seat. Do not operate an individual seat with more than one occupant in or on any
part of the individual seat.
• To safely exit the unit and prevent a tripping hazard, bring the back upright
and close the legrest.
NOTICE:
After 1 minute of continuous operation, allow the back recline
and legrest extension features to rest for 9 minutes.
To avoid product damage, the back recline and legrest extension features should not be operated
continuously for extended periods of time. After 1 minute of continuous operation, allow these features
to rest for 9 minutes.
Plug the power cord directly into a wall outlet. Make sure there is enough slack in the cord running
from the chair to the outlet to allow for rocking and reclining. Never stretch or strain a cord.
The PowerReclineXR
®
offers three reclining options:
• Only recline the back. When the back is reclined, the chair can be rocked.
• Only extend the legrest. When the legrest is extended, the chair body tilts backward.
• Operate both the back recline and legrest extension simultaneously.
To recline, press and hold down one of the three reclining option buttons on the right side of the
hand wand. Release the button when you have reached a comfortable position.
To return to the upright position, press and hold down one of the three return buttons on the left
side of the hand wand. Release the button when you have reached a comfortable position, or
when the back is fully upright and the legrest is fully closed.
The function of each hand wand button is explained in greater detail on the following page.
We recommend that you unplug the power transformer if you will be away from your residence
for an extended period of time.
24
with Massage & Heat
®
PowerReclineXR
®
Operating Instructions
TO OPERATE HEAT OR MASSAGE:
Press the MSG button to start and stop the massage.
Press the
button to select your massage mode. The button light will change to green for
Constant massage, amber for Wave massage and red for Pulse massage. The massage program
will run for 15 minutes, then shut off. When restarted, massage will operate in the last mode
selected before shut off.
Press the
button to select the massage intensity. The button light will change to green for
Low intensity, amber for Medium intensity, and red for High intensity. The chair automatically
resets to the Low intensity setting when massage is restarted.
Heat may be used with or without massage. Press the HEAT button to start and stop the heat.
The button light will change to amber for Low heat, and red for High heat. The heat will operate
for 15 minutes, then shut off. The chair automatically resets to the Low heat setting when heat
is restarted.
When you are ready to leave the chair, turn the massage system off by pressing the MSG button.
The button light will change to blue. Turn the heat system off by pressing the HEAT button until the
indicator light changes to blue.
The massage and heat systems shut off automatically after approximately 15 minutes of operation.
If you immediately restart the systems, they will operate for an additional 15 minutes and then shut
off for a 30-minute cool down. You can restart the systems after the 30-minute cool down period.
If you attempt to restart the massage or heat function before the cool down period is over, the MSG
or HEAT button will flash for 5 seconds indicating the cool down period.
NOTE:
Activated massage and heat functions are temporarily suspended when the BACK,
LEGREST or BOTH buttons are in use.
Following a power outage or power interruption, the chair will return to the off setting
when power is restored.
We recommend that you unplug the power transformer if you will be away from your residence
for an extended period of time.
with Massage & Heat
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Powerrecline xr

Table des Matières