Usb; Usb Menus/Settings - Siemens KG28FM50/01 Notice D'utilisation

USB

Information!
The reader supports USB storage
devices (e.g. USB sticks) and card
readers (e.g. for SD/MMC/MS
cards).
USB hard disks are not supported.
S Select the USB input source.
S Connect a USB device to the USB
connection.
The following screen is displayed if
MP3, JPEG or MPEG files are
identified on the USB storage device.
MP3 files are displayed first and the
first file is played back.
1
1 Current folder
2 Current file
3 Buttons to switch between
MP3, JPEG and MPEG
playback.
S Press the Y or B button, to select a
folder or file.
S Press the A or " button to switch
between folders and files.
S Press ENTER to play a file.
No images are displayed when MP3
files are played. You only hear the
audio output.
When playing JPEG files, you can
rotate and flip the image during
playback or in pause mode. To do so,
use the following buttons:
Y: flip horizontal
B: flip vertical
A: rotate 90 degrees to the left
": rotate 90 degrees to the right
JPEG images with a maximum size of
1280 x 1024 pixels can be displayed.
The following repeat functions are
available:
S REP OFF
played once.
S REP 1
repeated.
S REP DIR
folder are repeated.
S REP ALL
repeated.
2
3
All files in one folder are
The selected file is
All files in the selected
All files in all folders are

USB menus/settings

Calling up the USB main
menu
S Select the USB input source.
S Press the USB MENU button on the
remote control. The screen displays
the USB main menu.
Exiting the USB MENU:
S Press the USB MENU button.
or
S Select the menu item EXIT SETUP
and press ENTER.
Information!
The following functions are cancelled
or suspended in the setup mode:
TITLE, SUBTITLE, DISPLAY, PLAY,
SETUP, STOP, SLOW/STEP, NICAM
AUDIO, FF, FR, PREV, NEXT, GOTO,
ZOOM, ANGLE, PROGRAM,
PREVIEW, REPEAT, REPEAT A−B.
43