Factory Default; System Info - Siemens KG28FM50/01 Notice D'utilisation

Factory Default

S Press the Y or B button to select
the Factory Default function.
S Press ENTER. The following screen
is displayed.
Restore to Defaults
S Press ENTER to open the Restore to
Defaults menu.
S Select YES.
S Press ENTER to restore the defaults.
If you do not wish to restore the
defaults, press the DTV MENU button
to return to the previous menu.
Clear Channels
S Press ENTER to open the Clear
Channels menu.
S Select YES.
S Press ENTER to clear all channels.
If you do not wish to clear the
channels, press the DTV MENU button
to return to the previous menu.
Country Select
This function is described in the
section "DTV country select".
Timer List
S Press the Y or B button to select
the Timer List function.
S Press ENTER. The following screen
is displayed.
S Press ENTER to switch to the
function entry.
Event ID
S Press the " button.
S Press the Y or B button to select
one of the following event numbers:
1 " 2 " 3 " 4 " 5.
S Press ENTER to confirm your
selection.
Channel
S Press ENTER.
S Press the Y or B button to select
the desired channel.
S Press ENTER to confirm your
selection.
Recurrence Mode
S Press the " button.
S Press the Y or B button to select
one of the following recurrence
modes:
ONCE " DAILY " WEEKLY.
S Press ENTER to confirm your
selection.
Start Time
S Press the A or " button to switch
between hours and minutes.
S Enter the start time using the
number buttons.
Start Date
S Press the A or " button to switch
between day, month and year.
S Enter the start date using the
number buttons.
Duration
Enter the duration using the number
buttons.
Status
S Press the " button.
S Press the Y or B button to select
the function: ON or OFF.
S Press ENTER to confirm your
selection.

System Info

S Press the Y or B button to select
the System Info function.
S Press ENTER. The following screen
is displayed.
Software Version
S Press the Y or B button to select
the Software Version function.
S Press ENTER to confirm your
selection.
The software version is displayed.
Press the DTV MENU button to return
to the previous menu.
Hardware Version
S Press the Y or B button to select
the Hardware Version function.
S Press ENTER to confirm your
selection.
The hardware version is displayed.
Press the DTV MENU button to return
to the previous menu.
41