Siemens KG28FM50/01 Notice D'utilisation page 35

TUNING
The TUNING menu contains the
following submenus:
TUNING PROGRAM "
PROGRAM EDIT " COUNTRY "
AUTO SEARCH.
S Press the Y or B button to select a
submenu.
S Press the " or ENTER button to call
up the submenu.
S Press the Y or B button to select a
menu item in the submenu.
TUNING PROGRAM
You can use this submenu to edit the
saved channels.
CHANNEL
The channel number you wish to edit.
Press the A or " button to select the
previous or next channel.
FINETUNE
If the picture or sound reception is not
ideal, you can fine−tune high and low
frequencies by pressing the A or "
button, to achieve the optimum
picture/sound quality.
SYSTEM
Press the A or " button to select a
system (DK, I, L, BG).
SKIP
You can use this function to block a
channel.
Press the A or " button to switch the
function on or off.
ON:
The channel number is skipped over
when you flick through the channels
using the CH + or CH − buttons on the
remote control or the channel − or
channel + buttons on the LCD TV.
However, the channel can still be
selected using the number buttons.
OFF:
The channel number is not skipped
over.
AUTOMATIC FREQUENCY
CONTROL (AFC)
Press the A or " button to switch the
function on or off.
After an automatic search, the function
is automatically switched ON.
If finetuning is carried out, the function
is automatically switched OFF.
CHANNEL NAME
This function allows you to enter a
channel name.
S Enter a channel name by using
buttons A / " and Y / B.
DELETE
You can use this function to delete a
channel.
S Press the " button to open the
submenu.
S Press the A button to select YES.
If you do not wish to delete the
channel, select NO.
S To delete the channel, press ENTER.
MANUAL SEARCH
You can use this function to start a
manual channel search.
S Press the Y or B button to choose
a direction.
DOWN: for lower frequencies
UP: for higher frequencies
S Press the " button to start the
search.
35