Yakima BigStack Instructions De Montage page 4

CAUTION: BigStacks may require re-
positioning to avoid vehicle contact.
GET READY TO LOAD YOUR BOAT(S)
FOLLOW THESE FOUR RULES WHEN STRAPPING KAYAK(S):
1
Distance of BigStack
from crossbar tower
is exactly the width of
kayak(s) on edge.
LOAD THE BOAT— TIE IT DOWN WITH STRAPS
TO LOAD STRAP WITH
BIGSTACK IN DOWN POSITION:
Pass strap
through hole.
Instruction #1033411D-4/21
Additional straps may be required for more than 2 kayaks.
Loop strap
under crossbar
at least once.
4
Always tie down the bow and stern. See step 12
for proper bow stern tie down procedure.
CAUTION: BigStacks may need to be
adjusted to be offset to allow for folding
masts down when not in use.
2
Raise mast
to upright
position.
Continue tying
boats as shown
on following
pages.
NOT PERMITTED. TIE-
OFF STRAP WILL SLIP
3
Loop strap
inboard of
crossbar tower.