Nozzle - L.B. White Tradesman CP075EK Guide De L'utilisateur Et Instructions D'installation

NOZZLE

Nozzle Adaptor
Fuel Line
Air Line
Nozzle Face
Nozzle
Nozzle Adaptor
Figure 16 – Nozzle Replacement For Models CP050EK-CP175FK
CLEAN NOZZLE AS NEEDED
(For Models CP050EK - CP175FK only)
- Remove upper shell (See Air Intake Filter, page 12).
- Remove fan blade (See Fan Blades).
- Remove fuel and air line hoses from nozzle adaptor.
- Remove ignitor wire from spark plug.
- Remove spark plug from nozzle adaptor using medium
Phillips screwdriver.
- Turn nozzle adaptor 1/9 turn(40°) to counter clockwise
and pull toward motor to remove. (See Figure 16)
- Place plastic hex-body into vise and lightly tighten.
- Carefully remove nozzle from burner head using 5/8"
socket wrench.
- Blow compressed air through face of nozzle.
(this will remove any dirty in nozzle)
- Reinstall nozzle into nozzle adaptor until nozzle seats.
Tighten 1/3 turn more using 5/8" socket wrench.
(40~45 inch-pounds)
- Reinstall nozzle adaptor to burner head.
- Reinstall spark plug to nozzle adaptor.
- Attach ignitor wire to spark plug.
- Attach fuel and air line hoses to nozzle adaptor.
- Reinstall fan blade and upper shell.
Combustion Chamber
Screw
Ignitor Wire
Spark Plug
Burner Head
Nozzle Adaptor
MAINTENANCE (cont.)
Nozzle Adaptor
Fuel Line
Air Line
Nozzle Face
Nozzle
Nozzle Adaptor
Figure 17 – Nozzle Replacement CP210FK
(For Model CP210FK Only)
- Remove upper shell (See Air Intake Filter, page 12).
- Remove fan blade (See Fan Blades, page 13).
- Remove fuel and air line hoses from nozzle adaptor.
- Remove ignitor wire from spark plug.
- Remove spark plug from nozzle adaptor using medium
Phillips screwdriver.
- Turn nozzle adaptor 1/8 turn (45°) to counter clock wise
and pull toward motor to remove. (See Figure 17)
- Place plastic hex-body into vise and lightly tighten.
- Carefully remove nozzle from adaptor-nozzle using 5/8"
socket wrench.
- Blow compressed air through face of nozzle.
(this will remove any dirt in nozzle)
- Reinstall nozzle into nozzle adaptor until nozzle seats
Tighten 1/3 turn more using 5/8" socket wrench
(40~45 inch-pounds)
- Reinstall nozzle adaptor to burner bracket
- Reinstall spark plug to nozzle adaptor.
- Attach ignitor wire to spark plug.
- Attach fuel and air line hoses to nozzle adaptor.
- Reinstall fan blade and upper shell.
Combustion Chamber
Screw
Ignitor Wire
Spark Plug
Bracket-Burner
Nozzle Adaptor
14