GE ZEU30 Serie Manuel Du Propriétaire page 16

Custom
1. Press and hold All Off pad for 3 seconds, then
Settings
2. "C - -" appears on display. To navigate through
3. To activate a new Custom Setting the user will
4. The cooktop will exit Custom Settings if it is
5. To exit Custom Settings and save any changes,
16
immediately press and hold the Timer Select
pad for 3 seconds to enter custom settings.
Those two pads must be pressed within 30
seconds. Any other pad will cancel mode.
the Custom Settings, use the
pads. If (up) is selected the display cycle
starts at "C01". If V (down) is selected, the
display cycle starts at "C62".
touch and hold the Timer Select pad for 3 sec.
Only ONE of the Custom Setting Choices can
be activated for each Custom Setting. The red
"On" LED will turn on and a sound will go off
once a new custom setting is activated.
inactive for 3 minutes.
touch and hold the All Off pad for 3 seconds.
Custom Settings Chart
Custom Settings Custom Setting Choices
C0 (Factory Settings) C01 - Factory Reset (Clears customized settings and restores defaults)
C02 - Custom settings activated (Not visible unless any other custom setting is selected. And
automatically on when any other custom setting is selected. Not selectable by user.)
C1 (Control Lock) C11 - Standard Lock (ie; Only on when lock button pressed for 3 seconds.) If using a timer,
Control Lock is unavailable.
C12 - Auto Lock (ie; Engages after cooktop has been in standby mode for 10 minutes.) The
unit should be completely off to go into Auto Lock.
C2 (LED light level) C21 - Full illumination
C22 - Medium illumination
C23 - Lowest illumination
C3 (Button Loudness) C31 - All sounds activated at 100% (For alarm sounds, 100% = Whatever level is set in c4.)
C32 - Button sound level reduced by 50%, Alarm sounds at 100%
C33 - Button sounds deactivated, Alarm sounds activated at 100%
C4 (Timer Alarm C41 - High
Loudness)
C42 - Low
C5 (Timer Alarm C51 - Indefinite (ie; alarm continues until cancelled by user).
Duration)
C52 - Alarm sounds for 60 seconds.
C53 - Alarm sounds for 30 seconds.
C54 - Alarm sounds for 15 seconds.
C6 (Timer Mode) C61 - Single Kitchen Time (Independent of elements.)
C62 - Multi-Timer (Tied to each element.)
* Options in grey are default settings
Using Your Cooktop
(up) or V (down)
Radiant Cooktop