GE ZEU30 Serie Manuel Du Propriétaire page 15

Multiple
Timer Mode
For more information see Custom Settings, Timer
Timers
Mode section for Multi-Timer feature. Each burner
can be linked to a timer. Burner must be on to set
the timer. When more than one burner is on, the
order of the timer is from left to right.
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The
Hot Light
A hot surface indicator light (one for each cooking
element) will glow when the glass surface is hot
Indicator
and will remain on until the surface has cooled to
a temperature that is safe to touch.
corresponding burner power level and the
display will blink. Touch the
adjust time. Timer automatically starts after 3
seconds if there is no further action. The "ON"
LED will light when timer is on.
Burner Power
Level
Using Your Cooktop
2. To set timer for the next burner, touch the Timer
Select pad. The corresponding burner power
level and the display will blink. Touch the
arrows to adjust time. Timer automatically starts
after 3 seconds if there is no further action. The
"ON" LED will light when timer is on. Repeat the
steps for the remaining timers.
To Turn ON Multiple Timers
or V arrows to Hold Timer Select pad for 3 seconds to cancel
timer. The corresponding burner power level and
display will blink. When the burner times out, the
corresponding timer also times out.
Radiant Cooktop
Display
Hot Surface Indicator Light
or V
15