Location; Codes And Standards - Vulcan 2GR45MF Manuel D'installation Et De Fonctionnement

GRMF SERIES GAS FRYERS

Minimum clearance from noncombustible construction:
0" from the sides of the fryer
0" from the back of the fryer
 Between the fryer and any open-top flame units: 16" (41 cm)

Allow space for servicing and operation.

Location


Install fryer in an area with sufficient air supply for gas combustion at fryer burners.

Do not obstruct the flow of combustion and ventilation air.

Provide adequate clearance for air openings into the combustion chamber.

Do not permit fans to blow directly onto fryer.

Avoid wall-type fans, which create cross-currents within a room. Avoid open
windows next to sides or back.
The fryer must be installed in accordance with:
In the United States:

State and local codes, or in the absence of local codes, with:

National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition). Copies may
be obtained from The American Gas Association Accredited Standards Committee
Z223, @ 400 N. Capital St. NW, Washington, DC 20001 or the Secretary Standards
Council, NFPA, 1 Batterymarch Park Quincy, MA 02169-7471.

NFPA Standard #96 Vapor Removal from Cooking Equipment, latest edition,
available from the National Fire Protection Association, Batterymarch Park, Quincy,
MA.

National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained
from The National Fire Protection Association, Batterymarch Park, Quincy, MA.
02169-7471.

In the commonwealth of Massachusetts all gas appliances vented through a
ventilation hood or exhaust system with a damper or with a power means of
exhaust shall comply with 248 CMR.
VULCAN-HART

CODES AND STANDARDS

-6-
F-31233 Rev. T (12-15)