Installation; Link - Faicom MC Serie Notice D'utilisation Et D'entretien

IMPORTANT! Any installation operation shall be carried out by a suitably
trained staff, following carefully the information given in this manual.
Check the packaging at the reception of the goods and store only at a dry place. Verify that
the device hasn't been damaged during transport or storage operations. Make sure you re-
ceive all the components. Ask the manufacturer for any possible missing component.
The hose reel has to be wall mounted at a minimum height of the floor of 2.50 m in
order to prevent accidents during work operations. Considering the hose reel weight
and dimensions, his movement requires the use of lifter devices.
It is possible to mount it on the floor or as accessory on other machines, but only in a pro-
tected position.
The fixing stands can be mounted in three different positions on the hose reel, to install it in
the desired way (see picture A).
Mount the hose reel already complete with hose on stiff and consistent walls, using 4 dowels
of 10 mm diameter. The assembly with the revolving stand (optional) shall be carried out
using two dowels of 10 mm diameter.
WARNING! The manufacturer declines any responsibility for injuries to people or da-
mages to things caused by a wrong assembly of the hose reel.
Always connect the hose reel to the line by the couplers
and the flexible hose (A) suitable for this use, above all
in case of high pressure and temperature.
IMPORTANT! When you lock the coupler, keep back the
swivel joint by the 27 wrench (B) in order not to damage it.
Thus it is possible to avoid consequent losses of fluid from
the inside seal (hose reel for high pressure).
According to the rules, put a ball-tap on the feeding line of
the hose reels in order to make the maintenance operations
easier. The said ball-tap can be used as a safety valve for
dangerous situations.

8 - INSTALLATION

optional

9 - LINK

9 - LINK
- 13 -
A