Removal / Re-Use - Artidor AR-021 Mode D'emploi

If non-original parts are used or repairs are carried out in an incompetent manner, the
explosion-safety of the motion sensor can no longer be guaranteed. Therefore it is preferred
that the motion sensor will be returned to the manufacturer or its representative for repair.
If the housing is opened care must be taken of the following:
•
The housing must not be opened unless power is switched off prior to repair.
•
The housing must not be opened unless the area has been known to be non-hazardous.
•
If opened, the AR-021 motion sensor shall be dismantled in a logical sequence.
12.

Removal / re-use

For processing regarding disposal or reuse of the product and its packaging, national
disposal and environmental laws and legislation must be taken into consideration.
Alterations can be made to this user manual without notice.
Installation manual AR-021 explosion-safe motion sensor
E
04-2022
11 / 44