Characteristics; Application - Artidor AR-021 Mode D'emploi

•
All unused openings should be plugged off in a properly closed and tight way.
•
Either decommission the motion sensor or do not use it when it is damaged.
•
E During installation of the motion sensor national safety regulations must be observed.
•
Only use the motion sensor under the environmental conditions for which it is specified.
Deviating environmental conditions can contribute to damage to the equipment and may
lead to possible danger to the life of the user.
•
Do not use the motion sensor at temperatures deviating from the specified ambient
temperature range.
•
Follow all instructions written on the equipment and as mentioned in this manual.
•
Repairs may only be carried out by the manufacturer or by a person appointed by the
manufacturer.
•
Modifications to the equipment or changes to the design are not permitted.
•
The product may only be used for the function for which it is designed and shall be
maintained in a good and clean condition.
If these instructions are not followed, the explosion safety of the equipment cannot be
guaranteed. The equipment could then endanger the life of the user and could cause the
ignition of an explosive atmosphere. Consequently, Artidor as the manufacturer will waive
any responsibility.
3.

Characteristics

The characteristics of the motion sensor can be summarized as follows:
•
Robust design
•
Coated aluminum or stainless steel 316 housing and adjustable stainless steel 316
mounting bracket
•
Provided with two Ex e cable glands
•
Manufactured on the basis of the European Directive 2014/34/EU (ATEX 114)
•
Suitable for use in gas and dust hazardous areas classified as zone 2 and 22
•
Explosion safety category and protection degree against ignition applied:
II 3 G Ex nR IIC T6 Gc
II 3 D Ex tc IIIC T80˚C Dc
•
Protection degree against the ingress of water and dust IP66
•
Suitable for internal and external use
4.

Application

The explosion-safe AR-021 motion sensor has been designed for and is suitable for use in
hazardous classified areas due to flammable gases, vapors, mist, fibers and dust. Because it
Installation manual AR-021 explosion-safe motion sensor
6 / 44
04-2022