Routine Maintenance; Main Brush - Roborock S6 MaxV Mode D'emploi

Routine maintenance

Main brush

Clean weekly
1. Turn over the robot, press the latch, and remove the main brush cover.
2. Pull out the main brush. Remove and clean the main brush bearing.
3. Rotate the main brush cap in the indicated unlock direction to remove the
cap.
4. Use the main brush cleaning tool to remove any entangled hair on the brush
or bearing.
5. Rotate the main brush cover and main brush bearing in the indicated lock
direction to reinstall them.
6. Reinstall the main brush, press on the main brush cover, and lock it .
Note：
Replace the main brush every 6 to 12 months for optimal cleaning performance.
Alignment
Main Brush
Bearing
Lock
Unlock
Using the main brush cleaning tool
Use the tool blade to cut away entangled hair on the brush and to clean
the bristles.
Note:
If there is a large amount of hair, or if hair is tightly entangled, remove it carefully to avoid damage.
Main Brush
Cover
Latch
Main Brush
Main Brush
Cap
27