Preparing For Use - WGP WORR MACHINE Manuel De L'utilisateur

WORR MACHINE® MARKER OWNERS MANUAL
II. P
REPARING fOR
1. Screw barrel onto marker
2. Place barrel blocking device properly onto the marker
3. Pull the cocking pin back until it latches into place
4. Make sure the safety is pushed to the "PUSH SAFE" position.
5. Connect the tank to the ASA (air system adapter.)
NOTE:
Make sure to always get your tank filled by authorized, skilled and knowledgeable
technicians for the correct fill limits of each tank. Do not try to refill tanks by your-
self. Do not use tanks that have not been properly maintained or that are damaged.
WGP recomends compressed air but C02 will work. Always be sure to only use ASTM
compliant tanks for your marker. Always use caution when refilling, attaching and
handling any type of air tank.
6. Attach the loader to the feed port of the marker
NOTE:
Use only 0.68 caliber paintballs in your Worr Game Products Worr Machine marker.
All WGP Worr Machine markers are timed and tested prior to leaving the factory.
Before field use, ensure the velocity is in compliance with field safety guidelines. General field
velocity limits are usually between 250-300 fps (feet per second). Your paintball markers velocity
should never exceed 300 fps. Observe and abide by all local laws, regulations and field safety
guidelines pertaining to the use of paintball markers.
WARNING:
Always wear paintball approved eye and face protection when dealing with a pressurized Always wear paintball approved eye and face protection when dealing with a pressurized
paintball marker. paintball marker.

U
SAGE