Cleaning Your Marker - WGP WORR MACHINE Manuel De L'utilisateur

VI. C y
LEANING OUR
It isn't necessary to completely disassemble your marker to clean it. WGP recommends
the following cleaning be done after each day of play:
1. Before you start ALWAYS make sure that all paintballs are out of the marker.
2. Remove air source and ensure that all air has been released from the marker.
3. Remove the barrel sock and then remove the barrel.
4. Lightly spray marker down with a 50-50 mix of rubbing alcohol and water and then wipe down.
5. Wipe down the marker with a clean cloth, or blow off the marker with compressed air (NOT CO2).
6. Remove bolt and lubricate bolt O-rings with Mineral oil, then reinstall.
7. Lubricate all moving parts with Mineral oil, and reassemble.
8. WGP recommends that after every 4-5 days of play you place 3-4 drops of 3 in 1 or other
paintball marker specific oil in the air receiver and fire the marker 10-15 times without
the barrel. This will distribute the oil throughout the marker and lubricate the internals.
Factory Approved Lubricants:
• Mineral oil only
WARNING:
Always make sure you and everyone around you wears protection when you clean the marker or check
it for paintballs.
WORR MACHINE® MARKER OWNERS MANUAL
M
ARKER