Rules Of Safe Paintball Marker Handling - WGP WORR MACHINE Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WORR MACHINE® MARKER OWNERS MANUAL
I. R
S
ULES Of
AfE
Y
Worr MACHINE®
our
MArkEr Is Not A toY
18 years old to purchase. 14 years old to play with adult supervision or 10 years old to use on
paintball fields meeting ASTM-standard F1777-97. Respect other peoples' property and when
using the Worr Machine marker, obey all local, state and federal laws. When entering a paintball
field, become aware of their rules and regulations. It is very important to have the proper paintball
protection before going to the paintball field for play. This includes and is not limited to eye, head,
throat, and body protection. All protection used should be designed for the sport of paintball, e.g.:
eye gear designed specifically for paintball usage.
Always have a barrel plug or barrel sock in place and keep the safety ON when handling your mark-
er. When repairing or cleaning your marker first remove barrel and gas cylinder, then depressurize
your marker by pointing in safe direction and dry-firing. Always treat the paintball marker as if it
were loaded. When handling the marker, always keep your fingers or any other objects away from
the trigger assembly to avoid accidental discharges. Make sure when carrying or transporting the
marker, to keep the muzzle pointed downward with a barrel blocking device in place. Before trans-
porting your marker through public areas, such as airports, or bus and trains stations, call ahead
for regulatory information regarding the carrying and transporting of such an item.
Remember, the Worr Machine marker should never be pointed or fired at anyone without the
proper paintball approved eye and face protection, and should only be used at a supervised,
licensed and insured paintball fields.
NOTE:
A safe environment is an area where you and everyone within 200 yards is wearing
paintball approved safety goggles and equipment. An area that is netted in and meets
ASTM-standard F1777-97.

P
M
AINTbALL
ARKER
.
H
ANDLING

Publicité

Table des Matières
loading

Table des Matières